Máy hiện sóng tương tự Pintek PS-600 ( 60MHz, 2Channel)

Hãng sản xuất:    PINTEK
Model:    PS-600
Xuất xứ:    Đài Loan

60MHz DUAL TRACE, DUAL TRIGGER.
VERT SENSITIVITY FROM 1mV/DIV TO 15V/DIV.
SWEEP RATE FROM 10nS/DIV TO 2S/DIV.
HOLD-OFF, X-Y OPERATION.
CE, TUV GS, UL, CUL, IEC1010.
 

Chi tiết    
CRT:
Type :    Rectangular with integral graticule.
Display Area :    8 x 10 div ( 1 div = 1 cm )
Accelerating Voltage :    12 kV.
Phosphor :    P31.
VERTICAL AMPLIFIERS ( CH 1 and CH 2 )
Sensitivity :    5 mV / div to 5 V / div ( X1 mode ).
1 mV / div to 5 V / div ( X5 mode ).
1-2-5 sequence, 10 step attenuator. 
Vernier control provides fully adjustable 
attenuation between steps.
Accuracy :    ± 3 % ( X1 mode ).
± 5 % ( X5 mode ).
Input Resistance:    1 MΩ ± 2 %.
Input Capacitance:    25 pF ± 10 pF.
Frequency Response:    5 mV to 5 V / div ( CAL ):DC to
60 MHz (-3 dB).1 mV / div (CAL):
DC to 20 MHz (-3 dB)
Rise Time:    Approximately 5.8 ns.
Operaing Modes:
CH1:    CH 1, single trace.
CH2:    CH 2, single trace.
ALT:    dual trace, alternating.
CHOP:    dual trace, chopped.
ADD:    algebraic sum of CH 1 + CH 2.
Polarity Reversal ( Invert ):    CH 2 only.
Maximum Input Voltage:    400 V dc + ac peak.
HORIZONTAL AMPLIFIER ( Input through channel 1 input )
X-Y mode:    switch selectable using X-Y switch.
CH 1:    X axis.
CH 2:    Y axis.
Sensitivity:    1mv/div to 5v/div
Accuracy:
Y-Axis:     ± 3%.
X-Axis:    ± 6%.
Input Impedance:    1MΩ ± 2% 25PF
Frequency Response:    DC to 1 MHz typical ( -3 dB ).
X-Y Phase Difference:    Approximately 3° at 50 kHz.
Maximum Input Voltage:    400V dc+ac pack
SWEEP SYSTEM
Sweep Speed:    0.1 μs/div to 2S/div in 1-2-5 sequence, 23 steps.
Vernier control porvides fully adjustable sweep
time between steps.
Accuracy:    ± 3 %.
Sweep Magnification:    10X, ± 10%
Holdoff:    Continuously adjustable from NORM to 5 times normal.
TRIGGERING
Trigger Modes:    AUTO ( free run ) or NORM.
Trigger Source:    CH 1, CH 2, ALT, EXT, LINE.
Maximum External Trigger Voltage:    300 V dc + ac peak
Trigger Coupling:    　
AC :    30 Hz to 60 MHz
TV-H :    Used for triggering from horizontal sync pulses.
TV-V :    Used for triggering from vertical sync pulses.
Trigger Sensitivity:
Internal:    0.5 division ( 1 division with TV Coupling ).
External:    500 mV.
OTHER SPECIFICATIONS    　
Calibrating Voltage:    1 kHz ( nominal ) Positive Square Wave,
2.0 V p-p ( ± 3% )
Trace Rotage:    Electrical, front panel adjustable.
Power Requirements:    115/230 VAC ± 10%, 50 / 60 Hz,
approximately 40 W.
Dimensions:    324 x 132 x 398 mm ( 12.8 x 5.2 x 15.6" )
Weight:    Approximately 7.8 kg ( 17.2 1bs )
Rated Range of Use:    10° C-35° C, 10-80% R.H.